Remote Mode - Furuno NAVpilot-500 Operator's Manual

Orbit around the TLL
(clockwise)
3.4

REMOTE Mode

Four types of optional remote controllers may be connected to the NAVpilot-500.
These are useful to operate this equipment from a remote location.
Dial type remote controller (FAP-5551, 5552)
This remote controller can only be used when in the AUTO or NAV mode.
1. Turn on the remote controller switch to show "FU" (Follow-Up) on the control
unit. If the remote controller switch is turned on when in the STBY mode, a
beep sounds to alert you that remote mode is available.
Turning power on
(dial type)
TLL
Orbit mode (ex. clockwise)
Heading mode
M: Magnetic
T: True
FU mode Course set
(Follow-Up)
359
FU
HDG 359.9
M
RUDDER
0
40 20 10
10
Rudder angle
FU (Follow-Up) mode display
(dial remote controller)
3. STEERING MODE
TLL
Distance set
on menu
Clover leaf mode
Heading from
heading sensor
20
40
3-11