Furuno NAVpilot-500 Operator's Manual page 15

2. BASIC OPERATION
Selecting the display layout for Data Display
You can show two or three data on the Data Display.
1. Open the SCREEN SETUP menu referring to page 2-4.
2. Rotate the [ENTER] knob to select "SCREEN 3 PATTERN.
3. Press the [ENTER] knob to show the screen 3 options window.
4. Rotate the [ENTER] knob to select 2 DATA or 3 DATA as appropriate.
5. Press the [ENTER] knob.
6. Press the [ENTER] knob to close the menu.
Selecting data for Data Display
You may choose which data to show on the Data Display. Data 3 is available
only when you select 3DATA at "SCREEN 3 PATTERN" shown above.
1. Open the SCREEN SETUP menu referring to the page 2-5.
2. Rotate the [ENTER] knob to select "DATA 1", "DATA 2" or "DATA 3".
3. Press the [ENTER] knob show the option window.
The contents are same as the table shown on the previous page.
4. Rotate the [ENTER] knob to select data.
5. Press the [ENTER] knob.
6. Press the [MENU] key to close the menu.
2-6
STBY
HDG 116.5
20.4
(Data1)
(Data 2)
Data display, two data
Screen 3 pattern options window
STBY
HDG
20.4
Data display, three data
Data Displays
2 DATA
3 DATA
116.5
(Data1)
(Data 2)
(Data 3)