Simulation Mode; Accessing The Simulation Mode Through Navnet - Furuno FAX-30 Operator's Manual
Furuno facsimile receiver operation's manual fax-30
Hide thumbs
Also See for FAX-30:
- Operator's manual (125 pages) ,
- Service manual (34 pages) ,
- Features (1 page)
Table of Contents
Advertisement
6. MAINTENANCE, TROUBLESHOOTING
6.9
Simulation Mode
The simulation mode provides simulated operation of the equipment, using an
internally generated fax image and navtex message. The fax image may be
processed as desired. This mode is mainly used for exhibition purposes.
Note: All current fax images and navtex messages will be erased when
activating the simulation mode.
6.9.1
Accessing the simulation mode through NavNet
1. At the facsimile standby display, press the [MENU] key.
2. Press the FAX-30 SYSTEM SETUP soft key.
3. Press the SIMULATION SETUP soft key.
4. Choose WX FAX or NAVTEX as appropriate and press the EDIT soft key.
The illustration below shows the dialog box for WX FAX; the dialog box for
NAVTEX is similar.
5. Rotate the [ENTER] knob to choose SIMULATION and press the ENTER soft
key.
The fax image and navtex message will then be posted to the respective
standby display.
6-8
WX FAX
LIVE
NAVTEX
LIVE
Simulation setup menu
WX FAX
¡
SIMULATION
¤
LIVE
SIM
SETUP
EDIT
RETURN
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
