All Clear (For Technicians Only) - Furuno FAX-30 Operator's Manual
Furuno facsimile receiver operation's manual fax-30
Hide thumbs
Also See for FAX-30:
- Operator's manual (125 pages) ,
- Service manual (34 pages) ,
- Features (1 page)
Table of Contents
Advertisement
6. MAINTENANCE, TROUBLESHOOTING
6.8
All Clear (for technicians only)
If the FAX-30 cannot be operated from the NavNet display unit, do the following:
1. Unplug the power connector from the FAX-30.
2. Open the cover.
S1
FAX-30, cover opened
3. Turn on the #1 segment of S1 on the MAIN board (08P3218).
4. Connect the power connector and turn on the NavNet display unit.
5. Confirm that the LED on the FAX-30 is flashing.
6. Turn off the NavNet display unit and disconnect the FAX-30's power cable.
7. Turn off the #1 segment of S1.
8. Close the cover and reconnect the power cable.
6-7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
