Preparations For Using The Fax-30 - Furuno FAX-30 Operator's Manual

1. OVERVIEW, SETUP
1.1.2

Preparations for using the FAX-30

The NavNet series display unit must output the date and time data sentence
ZDA through the network in order to use the facsimile timer recording feature.
Further, automatic navtex requires the geographical position data sentence GGA
(GPS position fix data) or GLL (geographic position, latitude/longitude). Output
appropriate data sentences from the NavNet display unit to the FAX-30 as
follows:
1. Turn on the NavNet display unit. From the radar, plotter or echo sounder
display, press the [MENU] key.
2. Press the SYSTEM CONFIGURATION soft key.
3. Press the SYSTEM SETUP soft key.
4. Press the PORT SETUP soft key.
5. Press the OUTPUT THROUGH NETWORK soft key.
6. Rotate the [ENTER] knob to choose GGA, GLL or ZDA.
7. Press the ON/OFF soft key to display ON.
8. Repeat steps 6 and 7 to set the other two sentences to ON.
9. Press the [MENU] key to close the menu.
1-2
AAM --
APB ON
BOD --
BWR* --
DPT --
GGA --
GLL ON
GTD --
MTW --
RMA --
RMB ON
RMC ON
VHW --
VTG ON
WPL --
XTE --
ZDA ON
HDT --
HDG --
MWV --
--
TTM
*: BWR: Rhumb line
BWC: Great circle
Select sentence window
SELECT
SNTNC
ON/OFF
RETURN