Setting Up Navtex Stations, Messages, Alarms - Furuno FAX-30 Operator's Manual
Furuno facsimile receiver operation's manual fax-30
Hide thumbs
Also See for FAX-30:
- Operator's manual (125 pages) ,
- Service manual (34 pages) ,
- Features (1 page)
Table of Contents
Advertisement
4. NAVTEX OPERATION: NAVNET
4.2
Setting Up Navtex Stations, Messages, Alarms
You may freely select the navtex stations from which to receive and the
messages categories to receive. Further, you may enable or disable received
message alarms.
1. At the standby display, press the NAVTEX soft key. If you have received
some navtex messages, their data are shown as below.
1. IA55
2. IA53
3. IA52
4. IA48
2. Press the RX SETUP soft key.
3. FREQUENCY is selected, press the EDIT soft key.
4. Rotate the [ENTER] knob to choose 490 kHz or 518 kHz depending on the
station and press the ENTER soft key.
4-2
JUN/06 03:57 518kHz
JUN/06 03:58 518kHz
JUN/06 03:59 518kHz
JUN/06 04:01 518kHz
Navtex message data display
FREQUENCY
STA. SELECTION MODE
STATION SELECTION
MESSAGE SELECTION
MAX ERROR RATE
ALARM (SAR MSG)
ALARM (WARNING MSG) OFF
FREQUENCY
¤
¡
Navtex frequency options
NAVTEX
SELECT
MSG
RCV
Appears when the mode is
NAVTEX
NAVTEX or FAX(TIMER)&NAVTEX
RX
SETUP
RETURN
518 kHz
MANUAL
.
33%
OFF
RX setup menu
490 kHz
518 kHz
RX
SETUP
EDIT
RETURN
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
