Choosing The Receive Mode; Logging Out - Furuno FAX-30 Operator's Manual
Furuno facsimile receiver operation's manual fax-30
Hide thumbs
Also See for FAX-30:
- Operator's manual (125 pages) ,
- Service manual (34 pages) ,
- Features (1 page)
Table of Contents
Advertisement
1. OVERVIEW, SETUP
1.2.2
Choosing the receive mode
The FAX-30 has three modes: facsimile only, navtex only, and facsimile (timer) &
navtex. Choose desired mode as follows.
1. At the facsimile or navtex standby display, click RX MODE.
2. Click receive mode desired and then click OK.
3. Click "<back" or Back button to return to the top menu.
1.2.3
Logging out
The FAX-30 cannot be accessed simultaneously by multiple PCs. For this
reason, log out a PC from the FAX-30 when its use is not required.
1. At the facsimile or navtex menu display, click "<Top" to return to the facsimile
receiver top display. (See the illustration at the top of the previous page.)
2. Click LOGOUT to logout the PC from FAX-30.
1-8
RX MODE
¤
WX FAX
¡
NAVTEX
¡
FAX(TIMER) & NAVTEX
OK
< back
RX mode options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
