Fuel Strainers & Fuel Lines
A fuel strainer and flexible fule line can be installed at the fuel pressure regulator to make
connection to the fuel main shutoff valve easier. Either 1-1/4" or 2" fittings may be specified.
GLCFFL1 3/4" NPT Female fittings, 12" long
GLCFFL2 1 - 1/4" NPT Female fittings, 18" long
GLCFFL3 2" NPT Female fittings, 12" long
GLCFFS1-
3/4" NPT Fuel Strainer female Inlet, male outlet.
GLCFFLS3
2" NPT Fuel Strainer female Inlet, male outlet.
Installation: Use appropriate thread sealer as required by plumbing codes.
MN2408
Figure A‐5 Fuel Strainer and Flex Fuel Line Connections
1.
Thread Fuel strainer onto NPT close pipe nipple.
2.
Install NPT close pipe nipple to Fuel strainer input.
3.
Thread Flex Fuel Line onto NPT close pipe nipple.
4.
Connect other end of Flex Fuel Line to site fuel supply pipe as required by plumbing
codes.
Fuel Strainer
Fuel Flex Line
Options & Accessories A‐5