Appendix A Options & Accessories; Battery Charger - Baldor GLC10 Installation & Operating Manual

Appendix A
Options & Accessories

Battery Charger

BTCGR6 Battery Charger - 12 Volt / 6 Amp Float. Includes 6 ft power cord with grounding plug
for AC input power and 4 ft power cord with ring terminals for DC output. UL Listed.
BTCGR10A Battery Charger - 12 Volt /10 Amp Float. Includes terminal strip for AC input power
and DC output.UL Listed.
BTCGR6
Installation Considerations:
Shore power must be available (120VAC or 240VAC) to power the battery charger and other
components that may be installed). Shore power outlets or wiring must be located close to
Battery Charger.
BTCGR6 Charger (refer to charger manual for specific details)
BTCGR10A Charger (refer to charger manual for specific details)
MN2408
Figure A‐1 Recommended Mounting Locations
GLC30-45 Battery Charger
Mounting Locations
BTCGR10A Battery
Tray
1. Mount charger, refer to Figure A‐1 to determine suggested location.
2. Connect charger negative wire to battery "-" negative terminal.
3. Connect charger positive wire (with fuse) to battery "+" positive terminal.
4. Connect charger AC power cord to shore power outlet.
1. Mount charger, refer to Figure A‐1 to determine suggested location.
2. Connect charger negative wire (Black) to battery "-" negative terminal.
3. Connect charger positive wire (Red) to battery"+" positive terminal.
4. Connect charger AC power cord to shore power outlet.
GLC60-105 Battery Charger
Mounting Locations
Battery
BTCGR10A
Tray
BTCGR6
Options & Accessories A‐1