Engine Block Heater - Baldor GLC10 Installation & Operating Manual

Engine Block Heater

Installation Considerations:
Shore power must be available (120VAC or 240VAC) to power the block heater and other
components that may be installed). Shore power outlets or wiring must be located close to block
heater.
Catalog # G10A Block Heater (refer to block heater manual for specific details)
MN2408
1. Mount the block heater, refer to Figure A‐3 to determine suggested location.
2. Connect the inlet hose to the inlet hose bib on the block heater.
3. Connect the outlet hose to the outlet hose bib on the block heater.
4. Connect the AC power cord to shore power outlet.
Figure A‐3
Options & Accessories A‐3