Table of Contents
Advertisement
Programme stepping, up/ down manoeuvring in menus.
Most set top boxes and TV's has 4 arrow buttons for manoeuvring in on-screen menus,
up, down, left and right. In addition they are equipped with separate programme step-
ping buttons for zapping through the programme list. Often these keys are named P+, P
-, CH+ or CH-.
OneRemote often makes use of the Rand the
ping. This way the four up, down, left and right buttons are free to be used for the more
natural use of manoeuvring in on screen menus.
Using a Beo4 Navi in mode 2, manoeuvring in On-screen menus is fully handled using
the added 'joy-stick', not available on previous Beo4 models. In a Beo4 Navi setup we
therefore can make use of the up and down arrows for programme zapping.
Setting the Zap Mode Option
If the OneRemote controller is not set to operate in Navi mode, the Beo4 but-
tons
and
W
R
are used to manoeuvre up and down in an on-screen menu. This is the default factory
setting, as described above.
Selecting the Zap mode buttons:
Enter one of these 2 codes within 10 seconds to set the preffered Programme Zap mode buttons.
LIGHT
mq90p
LIGHT
mq91p
are used for programme stepping. The
W
The
and
D
F
gramme zapping.
The
buttons will be used for pro-
W
&
R
gramme zapping.
6
keys for programme zap-
and
D
F
buttons will be used for pro-
buttons
Advertisement
Table of Contents
