Setting The Oneremote Volume Option - OneRemote RMB4 User Manual

Setting the OneRemote Volume Option

When the TV mode is selected by pressing the
on the TV and turns on the picture.
But often the sound is lead to external speakers at-
tached to a B&O audiomaster or another amplifier.
This option set the way that the OneRemote handles
volume in TV mode.
This option also can power on other B&O devices
than the TV, when
typically fed from the TV to the audiomaster from
using a Line to Datalink cable. Moving the TV sound
to the speakers of the audiomaster, significantly im-
proves the sound quality.
Volume options
LIGHT
mq00p
LIGHT
mq01p
LIGHT
mq02p
LIGHT
mq03p
LIGHT
mq04p
LIGHT
mq05p
*1 When is pressed your Beo4 it sends a Power On command to your TV. At the same the Beo4 sends
t
a AAUX command to a Bang & Olufsen audiomaster.
Until another source is selected, volume commands will be directed to the B&O audiomaster.
*2 When is pressed your Beo4 it sends a Power On command to your TV. At the same the Beo4 sends
t
a command to a Bang & Olufsen system.
c
Until another source is selected, volume commands will be directed to the B&O system.
*3 When is pressed your Beo4 it sends a Power On command to your TV. At the same the Beo4 sends
t
a AAUX + or
6
Until another source is selected, volume commands will be directed to the B&O linksystem.
is selected. Audio is then
t
command to a Bang & Olufsen linksystem.
7
button, it automatically powers
t
Sound destination Volume control
Volume disabled
The non B&O TV
AAUX *1
PC *2
AAUX + *3
6
AAUX + *3
*
7
11
No volume regulation
Non B&O TV format
AAUX in B&O format
PC in B&O format
AAUX in B&O format
AAUX in B&O format