OneRemote RMB4 User Manual page 13

The Beo4 DTV/ SAT button option
On your OneRemote modified Beo4 remote control, the DTV/ SAT button can be pro-
grammed, to open a specific source on your non B&O TV.
DTV/ SAT options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected
with the DTV/ SAT button.
LIGHT
mf01p
LIGHT
mf11p
LIGHT
mf21p
LIGHT
mf31p
LIGHT
mf41p
LIGHT
mf51p
LIGHT
mf61p
LIGHT
mf71p
LIGHT
mf81p
LIGHT
mf91p
As the OneRemote controller is able to operate many different TV models, there might be some sources in the
table, that is not available on your TV. The only way to find out if your TV accepts these codes, is testing
each of the options.
If a source is not access able using these options, sources must be accessed the same way as using the TVs
original remote control. Using the source button.
No new source selected.
The AV1 socket on the TV is opened.
The AV2 socket on the TV is opened.
The DTV tuner on the TV is opened.
The Component 1 socket is shifted to.
The Component 1 socket is accessed.
The HDMI 1 socket is accessed.
The HDMI 2 socket is accessed.
S-VHS 1
USB Wiselink
13