Table of Contents
Advertisement
Beo4 NAVI mode option.
Newer Beo4 models are named Beo4 Navi due to an added special navigation button.
A joystick type control button, placed where previous Beo4 models have a
If your Beo4 has a
Use of the Beo4 Navi joystick navigation operation:
Enter one of these 2 codes within 10 seconds to enable or disable the OneRemote controllers use of the ex-
Set the Beo4 Navi remote control in operation mode 2, as described in the B&O user guide that was sup-
plied with your Beo4, if you want to use these. Otherwise select mode 1.
LIGHT
mq51p
LIGHT
mq50p
button, this chapter is not relevant for you !
O
Enable use of the NAVI control.
When the OneRemote controller NAVI mode has been
enabled, use the operation table on page 9.
Disable use of the NAVI control.
When the OneRemote controller NAVI mode has been
disabled, use the operation table on page 8.
10
button.
O
Advertisement
Table of Contents
