OneRemote RMB4 User Manual page 15

The Beo4 VAUX button option
On your OneRemote modified Beo4 remote control, the VAUX button in the List-
menu can be programmed, to open a specific source on your non B&O TV.
VAUX options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected
with the VMEM or VTAPE button.
LIGHT
ma01p
LIGHT
ma11p
LIGHT
ma21p
LIGHT
ma31p
LIGHT
ma41p
LIGHT
ma51p
LIGHT
ma61p
LIGHT
ma71p
LIGHT
ma81p
LIGHT
ma91p
As the OneRemote controller is able to operate many different TV models, there might be some sources in the
table, that is not available on your TV. The only way to find out if your TV accepts these codes, is testing
each of the options.
If a source is not access able using these options, sources must be accessed the same way as using the TVs
original remote control. Using the source button.
No new source selected.
The AV1 socket on the TV is opened.
The AV2 socket on the TV is opened.
The DTV tuner on the TV is opened.
The Component 1 socket is shifted to.
The Component 1 socket is accessed.
The HDMI 1 socket is accessed.
The HDMI 2 socket is accessed.
S-VHS 1
USB Wiselink
15