pro SErIES II 20 amp powEr CondItIonErS P-8 Pro Series II Features • SMP+ with Extreme Voltage Shutdown • LiFT (Linear Filtering Technology) with zero ground contamination • Eight rear panel outlets and one front panel outlet • BNC connector on the rear panel allows attachment of an optional gooseneck lamp to illuminate the rear of your rack •...
Do not use solvents or abrasive cleaners. Never pour liquid on or into the unit. 7. Your Pro Series II unit should be serviced by qualified service personnel when: • The power supply cord or the plug has been frayed, kinked, or cut. • Objects have fallen or liquid has spilled into the unit.
Page 4
Furman’s clamping voltage rating will be compromised. The unit must be returned to Furman Sound, or an authorized Furman Service center for repair. notE: If the mains power is above the high...
50 or 60 Hz AC line, it can be effectively reduced through use of low- pass filtering. THrEE YEAr LIMITED WArrANTY Furman Sound, Inc., having its principal place of business at 1997 South McDowell Blvd., Petaluma, CA 94954 (“Manufacturer”) warrants its P8-Pro and PL-8 Pro Series II Power Conditioners (the “Product”) as follows:...
Page 6
Manufacturer at its sole discretion if the product is modified in any way without written authorization from Furman Sound. This warranty also does not apply to Products upon which repairs have been affected or attempted by persons other than pursuant to written authorization by Manufacturer.
Page 7
pro SErIES II 20 amp powEr CondItIonErS P-8 Pro rear light switch Protection oK & Extreme Voltage LED’s Dimmer control for PL-8 Pro front rack lights rear light switch Protection oK & Extreme Voltage LED’s rear of both Analog outlets Switched outlet Switched outlet LED rack Lights...