Honeywell LYNXR-2 Series Security System User Manual page 39

LYNXR-2 Series Speaker Phone Functions
To place a call using the Speaker Phone:
To answer a call using the Speaker Phone:
To flash (switch between two calls using call waiting):
OFF
To hang up:
To activate/deactivate (toggle) ringer:
To return the keypad to telephone mode after disarming the system:
NOTES: (1) The speaker phone ringer can only be enabled/disabled when the speaker phone mode is
not active. The system will ring once to confirm the ringer is enabled.
Entering [#] +
that the ringer is disabled.
(2) The speaker phone ringer will not ring when an alarm, trouble or entry/exit delay are
sounding.
(3) The LYNXR-2 Series speaker phone does not provide a "hold" feature.
[#] + AUX and dial the desired phone number.
[#] + AUX
[#] + VOLUME + AUX
+ a second time will disable the ringer. No ring will confirm
VOLUME AUX
– 39 –
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
Speaker Phone Feature
NOTE
If you are using pulse (rotary)
AUX
dialing, allow enough time for the
control to finish dialing the last
digit you dialed, before dialing
the next digit.
[#] + AUX