Voltage Test Points - Whirlpool GSF26C5EXW Technical Education

FOR SERVICE TECHNICIAN'S USE ONLY
Diagnostics, Wiring Diagrams And Troubleshooting

Voltage Test Points

DANGER
DANGER
Electrical Shock Hazard
Electrical Shock Hazard
Only authorized technicians should
perform diagnostic voltage measurements.
After performing voltage measurements,
disconnect power before servicing.
Failure to follow these instructions can
result in death or electrical shock.
When performing live voltage measurements, you must do the following:
Verify the controls are in the off position so that the appliance does not start when energized.
Allow enough space to perform the voltage measurements without obstructions.
Keep other people a safe distance away from the appliance to prevent potential injury.
Always use the proper testing equipment.
After voltage measurements, always disconnect power before servicing.
To check for proper voltage, complete the following steps:
1. Disconnect power.
2. Connect voltage measurement equipment.
3. Reconnect power and confirm voltage reading.
4. Disconnect power after performing voltage measurement.
(continued)
For Service Technician's Use Only
Voltage Measurement Safety Information
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Plug into a grounded (earthed) outlet.
Replace all parts and panels before
Replace all parts and panels before operating.
operatating.
Failure to do so can result in death or electrical s
Failure to do so can result in death or
electrical shock.
7-3
WARNING
Electrical Shock Hazard
Do no