Accessing Water Reservoir - Whirlpool GSF26C5EXW Technical Education

Refrigerator Compartment (continued)
Disassembling Refrigerator Compartment Components – Accessing Water
Reservoir
Disassembling Refrigerator Compartment Components – Accessing Water Reservoir
1. The light bulb cover is very
flexible and can be bent to
release the 4 tabs that
extend into the cabinet wall
and remove.
2. To replace the water reservoir, Shut off
water supply.
3. Remove the ¼" hex head screw and the
wire ties securing the reservoir to the
cabinet.
4. Disconnect the water tube connected to
the dual water valve located in the
machine compartment and disconnect the
water tube fitting on the lower left
hand corner of the reservoir. Pull out the
water reservoir and the water tube routed
through the opening in the cabinet.
Replace the reservoir.
A vacuum relief is located below the water
reservoir. The purpose of the relief is to allow
pressure to equalize between the inside and
outside of the refrigerator.
1
3
2
4
3
3-6