Whirlpool GSF26C5EXW Technical Education page 60

Dispenser Components (continued)
8. Remove 2 - 1/4" hex head screws
securing the dispenser assembly to the
door panel.
9. Remove the wiring harnesses from the
dispenser bracket. Remove the wire
harnesses.
10. Release the retaining clips on the left
and right side of the dispenser assembly.
11. Pull the top of the dispenser housing
out about 2" to allow removal of the
dispenser assembly.
12. Remove two screws to replace the
dispenser motor.
8
9
Lef t Clip
11
5-16
Right Clip
10
2"