Tools You Will Need; Mounting - GE JVM1430 Installation Instructions Manual

Installation Instructions
TOOLS YOU WILL NEED
# 1 and#2 Phillipsscrewdriver
Pencil
Tin snips(for cutting
damper,if required)
Scissors
(to cut template,if necessary)
Gloves
Safetygoggles
Saw(saber,hole or keyhole)
Ruleror tape measureand
t edge
Electricdrill with ¾_" VS"and%"
drill bits
Studfinder er Hammer (optional)
Level
(optional)
Fillerblocksor scrap
wood pieces,if needed
for top cabinetspacing
(usedon recessedbottom
cabinet installationsonly)
Ductandmaskingtape
MOUNTING SPACE
66" or more
from the floor
to the top of
the microwave
Bottomedgeof
cabinetneedsto
be 30" or more
from the cooking
surface
Backsplash
NOTES:
• Tile space betweei] tile cabiilets inust be 30" wide
aild flee r)f r)bstructir)ils.
" If the space betweei] the cabinets is greater
than 30", a Filler Panel Kit inay be used to fill
in the gap betweei] the iniciow, tve oven and the
cabinets. Your Owner's Manual contains the kit
iminber for your inodel.
" This iniciow:tve ()veil is fi)r installation over
ranges up to 36" wide.
" If you are going to vent your iniciow, tve oven to
the outside, see Hood Exhaust Section fi)r
exhaust duct preparation.
• When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
7