Sound Adjustment - Clarion DXZ389RGUSB Owner's Manual

Basic Operations

Sound Adjustment

You can adjust a sound effect or tone quality to
your preference.
To change sound setting
1. Press the [SOUND] button to switch to the
sound adjustment selection display.
The factory default sound setting is "Z-
EHCR".
2. Then press the [x] or [v] button to
select the sound adjustment mode.
Each time you press the [x] or [v]
button, the sound adjustment mode
changes as following order:
"Z-EHCR" "BASS"
"BALANCE" "FADER"
"S-W VOL" "HPF"
In the case of display blinking "ENT", you
[
can press the
setting value.
The sound adjustment mode will be
displayed for 2 seconds before showing the
sound setting.
3. Press the [w] or [z] button to adjust the
selected audio mode.
4. After completing settings, press the
[SOUND] button to return to the previous
mode.
Setting the Z-Enhancer Plus
This unit is provided with 4 types of sound tone
effects stored in memory.
Select the one you prefer.
The factory default setting is "OFF".
2-1. Select "Z-EHCR".
3-1. Each time you press the [w] or [z] button,
the tone effect changes in the following
order:
"Z+FLAT" "CUSTOM "
"IMPACT" "B-BOOST"
Z+FLAT : user Z+FLAT
CUSTOM : user custom
EXCITE : bass and treble emphasized
mid emphasized
IMPACT : bass and treble emphasized
B-BOOST : bass emphasized
OFF : no sound effect
14
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
"TREBLE"
"S-W LPF"
]
button to adjust the
"EXCITE"
"OFF"
When "Z+FLAT" is set:
3-2. Press and hold the [
or longer, bass/treble characteristics
become flat and switch to the "CUSTOM "
mode.
When "CUSTOM " is set:
3-1. Press the [x] or [v] button to select the
"BASS" or "TREBLE" mode to adjust.
When "EXCITE/IMPACT/B-BOOST" is set:
3-2. Press the [ ] button.
3-3. Press the [w] or [z] button to adjust the
setting in the range of
The factory default setting is "0".
3-4. Press the [ ] button to return to the
previous mode.
Adjusting the bass
This adjustment can be performed only when
the Z-Enhancer Plus is set to "CUSTOM ".
2-1. Select "BASS".
3-1. Press the [w] or [z] button to select as
following order.
"BASS(G)" "BASS(F)"
The factory default setting is "BASS(G)".
3-2. Press the [ ] button.
3-3. Press the [w] or [z] button to select the
setting.
BASS(G) : The factory default setting is "0".
(Adjustment range: +7 to
BASS(F) : The factory default setting is "60".
(Adjustment range: 60/80/100/
200)
BASS(Q) : The factory default setting is "1".
(Adjustment range: 1/1.25/1.5/2)
3-4. Press the [ ] button to return to the
previous mode.
] button for 1second
– 3 to +3.
"BASS(Q)"
7)
–