Radio Data System Operations - Clarion DXZ389RGUSB Owner's Manual

Radio Data System Operations

Radio Data System
This unit has a built-in "Radio Data System"
decoder system that supports broadcast
stations transmitting "Radio Data System" data.
This system can display the name of the
broadcast station being received (PS) and can
automatically switch to the broadcast station
with the best reception as you move long
distances (AF switching).
Also, if a traffic announcement or programme
type is broadcast from an "Radio Data System"
station, no matter what mode you are in, this
broadcast is received.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and
interruption of the station being received with
traffic information from other stations (TP). This
function is not available in some areas.
When using the "Radio Data System" function,
always set the radio to FM mode.
• AF : Alternative Frequency
• PS : Programme Service Name
• PTY : Programme Type
• EON : Enhanced Other Network
• TP : Traffic Programme
"Radio Data System" interrupt does not function
during AM radio reception or in TV mode.
When set receives "Radio Data System" signal,
and can read PS data, PS appears in the display.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
The factory default setting is "ON".
1. Press and hold the [DISP] button for 1
second or longer to switch to the "Radio Data
System" adjustment selection display.
2. Press the [x] or [v] button to select
"AF".
3. Press the [w] or [z] button to select
"OFF".
• ON:
"AF" in the display lights and AF function
turns on.
• OFF:
"AF" in the display goes off and AF function
turns off.
4. Press the [DISP] button to return to the
previous mode.
If the reception of the current broadcast station
deteriorates, "PISEARCH" appears in the display
and the radio searches for the same programme
on another frequency.
REG (Regional programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for that
region is received.
The factory default setting is "OFF".
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
1. Press and hold the [DISP] button for 1
second or longer to switch to the "Radio Data
System" adjustment selection display.
2. Press the [x] or [v] button to select
"REG".
3. Press the [w] or [z] button to select
"OFF".
• ON:
"REG" in the display lights and REG function
turns on.
• OFF:
"REG" in the display goes off and REG
function turns off.
4. Press the [DISP] button to return to the
previous mode.
" or
"ON
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
" or
"ON
19