Toshiba B-SA4TM Series Owner's Manual page 32

2. PRINTER SETUP
2.7.1 Parameter Setting
(Cont.)
NOTE:
Be careful if the printer is turned off
without pressing the [PAUSE] key,
the selected value does not become
effective.
NOTE:
The following fonts do not support a
zero with slash.
Bit Map Font:
OCR-A, OCR-B, GOTHIC 725 Black,
Kanji, Chinese
Outline Font:
Price Font 1, Price Font 2, Price
Font 3, DUTCH 801 Bold, BRUSH
738 Regular, GOTHIC 725 Black,
True Type Font
(1) Character Code Selection
This parameter is to choose a character code used for printing. Printed
characters differ depending on a chosen character code and font. For
details of characters, refer to the B-SA4T Series External Equipment
Interface Specification (Printer Command Manual).
When "<2>PARAMETER SET" appears, press the [PAUSE] key.
<2>PARAMETER SET
FONT CODE PC-850
Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
After selecting a character code, press the [PAUSE] key.
(2) Character Zero Selection
This parameter is to choose the way to indicate zero between "0" and "Ø".
When "<2>PARAMETER SET" appears, press the [PAUSE] key twice.
<2>PARAMETER SET
ZERO FONT 0
Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
After selecting a character zero, press the [PAUSE] key.
E2-18
ENGLISH VERSION EO1-33047
2.7 Setting an Operating Environment
FONT CODE UTF-8
FONT CODE PC-866
FONT CODE Arabic
FONT CODE LATIN9
FONT CODE PC1257
FONT CODE PC1254
FONT CODE PC1253
FONT CODE PC1252
FONT CODE PC1251
FONT CODE PC1250
FONT CODE PC-855
FONT CODE PC-851
FONT CODE PC-8
FONT CODE PC-857
FONT CODE PC-852
FONT CODE PC-850
ZERO FONT 0
ZERO FONT
Ø
(Without slash)
(With slash)