Real Time Clock: B-Sa704-Rtc-Qm-R - Toshiba B-SA4T Series Option Installation Manual

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

6. Real Time Clock: B-SA704-RTC-QM-R

B-SA704-RTC-QM-R is an optional Real Time Clock for the B-SA4TM/SA4TP Series. The pictures used in
this section are those of the B-SA4TP, and the installation procedures are common with the B-SA4TM
unless otherwise noted.
NOTE: When the B-SA704-IO-QM-R Expansion I/O Board or B-SA704-RS-QM-R Serial Interface Board
has been already installed in the printer, the Interface Cable of the Real Time Clock cannot be
connected to the MAIN PC Board. Please remove this optional PC board temporality, prior to
installing the Real Time Clock.
• Packing List
The following parts are supplied with the kit. Make sure you have all items shown below.
Real Time Clock (1 pc.) See Note.
Installation Manual (1 copy)
•
Installation Procedure
1. Remove the two SMW-3x6 screws from the back of the printer.
SMW-3x6 Screw
SMW-4x8 Screw (1 pc.)
Interface
Cable
Battery Sticker (1 pc.)
6- 1
(Revision Date: Jan. 19, 2006)
6. Real Time Clock: B-SA704-RTC-QM-R
Lithium Battery CR2032 (1 pc.)
Note: Make sure
Interface Cable
connected to CN1 on the
Real Time Clock.
Side Panel
EO15-33001A
that the
is