Turning on the power
This section describes how to turn on the power
After you turn on the power for the first time, do not turn it off until you
have set up the operating system (OS) and the OS has started up
1. Open the display panel.
2. Press and hold the computer's power button for two or three seconds.
P
OWER
Starting up for the first time
When you first turn on the power, the computer's initial screen is the
Microsoft
Follow the on-screen directions.
Turning off the power
The power can be turned off in one of three modes:shut down, hibernation
mode or standby mode.
Shut down mode
When you turn off the power in shut down mode, no data is saved and the
computer will boot to the operating system's main screen.
1. If you have entered data, save it to the hard disk or to a diskette.
2. Make sure all disk(disc) activities are terminated, then remove any
User's Manual
B
UTTON
®
Windows XP Startup Screen Logo.
diskette.
Turning on the power
Getting Started
.
3-5