Message Waiting Indicator (Mwi) - Cisco 7940 Manual
Configuring sip ip telephony using avaya converged communications server, avaya communication manager and cisco 7940/7960 sip telephones
Hide thumbs
Also See for 7940:
- Administration manual (122 pages) ,
- User manual (25 pages) ,
- Installation manual (12 pages)
Advertisement
3.2. Message Waiting Indicator (MWI)
With the Outboard Proxy SIP extended feature set, a SIP telephone that supports IETF RFC 3265
and MWI Draft 4 (Subscribe/Notify method) will illuminate/extinguish its MWI lamp when
voice messages are left/read for that extension. Since the Cisco 7940/7960 SIP phones support
only the unsolicited Notify method for MWI, this feature is not currently supported in
Communication Manager.
4. Configuring for the Basic Feature Set
4.1. Administer Users on the Avaya Converged Communications
Server
The following steps describe configuration of the Avaya Converged Communications Server to
for use with Cisco 7940/7960 SIP telephones. Other standard administration functions are
covered in Reference [1].
Steps
1.
The Avaya Converged Communications Server is configured using a web browser. Set the URL
of the browser to the IP address of the Converged Communications Server, and log in as admin
using the appropriate administrator password.
FAS; Reviewed:
WCH 10/22/2004
Solution & Interoperability Test Lab Application Notes
©2004 Avaya Inc. All Rights Reserved.
Description
6 of 35
Cisco7960SIP.doc
Advertisement
