Table of Contents
Advertisement
VideoJet X40 SN
Protected VideoJet X40 SN
If the VideoJet X40 SN is password protected against unauthorized access, the Web browser
displays a corresponding message and prompts you to enter the password when you attempt
to access protected areas.
NOTICE!
i
The VideoJet X40 SN offers the option to limit the extent of access using various authorization
levels (see Section 5.11 Advanced Mode: Password, page 38).
1.
2.
Protected Network
If a RADIUS server is employed in the network for managing access rights (802.1x
authentication), the VideoJet X40 SN must be configured accordingly, otherwise no
communication is possible.
To configure the unit, you must connect the VideoJet X40 SN directly to a computer using a
network cable. This is because communication via the network is not enabled until the
Identity and Password parameters have been set and successfully authenticated (see
Section Authentication, page 85).
5.2
Configuration Menu
The SETTINGS page provides access to the configuration menu, which contains all the unit's
parameters arranged in groups. You can view the current settings by opening one of the
configuration screens. You can change the settings by entering new values or by selecting a
predefined value from a list field.
There are two options for configuring the unit or checking the current settings:
–
–
In Basic Mode the most important parameters are arranged in seven groups. This allows you
to change the basic settings with just a few entries and then put the device into operation.
Advanced Mode is recommended for expert users or system support personnel. You can
access all unit parameters in this mode. Settings that affect the fundamental functionality of
the unit (such as firmware updates) can only be altered in the advanced mode.
All parameter groups are described in this chapter in the order in which they are listed in the
configuration menu, from the top of the screen to the bottom.
CAUTION!
!
The settings in the advanced mode should only be processed or modified by expert users or
system support personnel.
All settings are backed up in the VideoJet X40 SN memory so they are not lost even if the
power fails.
Bosch Security Systems
Enter the user name and associated password in the corresponding text fields.
Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
Basic mode
Advanced mode
Installation and Operating Manual
Configuration Using a Web Browser | en
DOC | V4.0 | 2009.06
29
Advertisement
Table of Contents
