Zone 2; Making Zone 2 Connections; Setting The Zone 2 Out - Integra DTR-30.3 Instruction Manual

Zone 2

In addition to the main listening room, you can also enjoy playback in another room, which we call Zone 2. For either of
the rooms, you can specify a different input source.

Making Zone 2 Connections

There are two ways you can connect Zone 2 speakers:
1. Connect them directly to the AV receiver.
2. Connect them to an amp in Zone 2.
Connecting Your Zone 2 Speakers Directly
to the AV receiver
This setup allows 5.1-channel playback in your main room
and 2-channel stereo playback in Zone 2, with a different
source in each room. This is called Powered Zone 2, as the
Zone 2 speakers are powered by the AV receiver.
To use this setup, you must set the "Powered Zone 2"
setting to "Yes" (➔
Main room
Zone 2
Note
• With this setup, the volume of Zone 2 is controlled by the AV
receiver.
• Powered Zone 2 cannot be used if "Speakers Type (Front)" is
set to "Bi-Amp" (➔
En
60
page 45).
TV
AV receiver
R L
page 45).
Connecting the Zone Speakers to an
Additional Amplifier
This setup allows 7.1-channel playback in your main
listening room and 2-channel stereo playback in Zone 2.
Main room
AV receiver
Zone 2
R
Receiver/
integrated amp
Note
• With the default settings, the Zone 2 volume must be set on the
Zone 2 amp. If your Zone 2 amp has no volume control, set the
"Zone 2 Out" setting to "Variable" so that you can set the Zone
2 volume on the AV receiver.

Setting the Zone 2 Out

See "Multi Zone" (➔ page 55).
TV
IN
L