Step3: Multi-Zone Connection - Integra DTM-6 Instruction Manual

> Before Start > Part Names

Step3: Multi-zone Connection

a Analog Audio Cable
12
> Install
*
a
> Initial Setup > Playback
MAIN ROOM
ZONE2
LINE
IN
ZONE2 PRE OUT
Supplementary information | Advanced Setup | Others
You can enjoy audio in the separate room by, for example,
playing a Blu-ray Disc player in the main room (where this
unit is located) and listening to internet radio in the separate
room (ZONE 2).
0 DSD format files cannot be output to ZONE 2.
ZONE 2 PRE OUT
Connect the ZONE 2 PRE OUT L/R jacks of the unit and
the LINE IN jacks of the pre-main amplifier in a separate
room with an analog audio cable.
(*)You can also connect a subwoofer with built-in amplifier
to the ZONE 2 PRE OUT SUBWOOFER jack.
0 Settings are required in the Setup menu to adjust the
volume and sound quality on a power amplifier in another
room. Press Setup on the remote controller, and set "5.
Zone2" - "Z2Out" to "Variable". Otherwise, high-volume
sound may cause damage to the power amplifier or
speakers.