Running A Product Check - Epson XP-800 User Manual

LCD screen message
No dial tone detected.
Run Check Fax
Connection under Fax
Settings in Setup menu.
Combination of IP
address and subnet
mask is invalid. See
your documentation.
Recovery mode
Parent topic:
Related references
Where to Get Help
Paper Jam Problems Inside the Product
Paper Jam Problems in the Paper Cassette
Paper Jam Problems in the Auto Duplexer
Paper Jams in the Automatic Document Feeder
Related topics
Loading Paper
Placing Originals on the Product

Running a Product Check

Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load plain paper in the product.
3. Press the
4. Press the left or right arrow button and then select Setup.
Condition/solution
Make sure the phone cable is connected correctly and the phone line works.
If you connected the product to a PBX (Private Branch Exchange) phone line
or Terminal Adapter, turn off the Dial Tone Detection setting.
There is a problem with the network connection to your product.
An error has occurred during firmware updating. Connect your product using
a USB cable and try updating the firmware again. If you still receive this error
message, contact Epson for support.
Solving Problems
home button, if necessary.
279