Epson XP-800 User Manual page 31

4. Select the name of your wireless network or enter the name manually.
Note: To enter the wireless network name manually, scroll down and then select Other Networks.
Use the displayed keypad to enter your network name, as described in the next step.
5. Enter your wireless password (or network name and then password) using the displayed keypad.
Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and
lowercase letters, and numeric or special characters.
• Press the touch screen buttons repeatedly to scroll through characters.
• Press or to move the cursor.
• Press 1 Symb. to enter symbols.
• Press to delete the previous character.
6. Press Done when you're finished entering your password.
7. Confirm the displayed network settings and select Proceed to save them.
Note: If you need to change a setting, press the
8. If you want to print a network setup report, press the
9. Press the home button to exit.
The WiFi light should now be on, but not flashing.
back button.
start button. (Otherwise, select Cancel.)
31