Alarm Log - Eaton Powerware 9170+ UPS 3–18 kVA User Manual

Alarm Log

The alarm log is in menu 2 2. Move through the menu structure by
pressing the Menu button and pressing the
menu 2. Press
submenu 2. The display shows the most recent entry in the alarm log.
The log stores up to 10 entries, in chronological order. Use the
buttons to scroll up and down through the log entries. Each entry shows
the alarm code, the alarm date and time (in 24-hour format), and the
duration (in hours and minutes).
A typical alarm log entry is shown in Figure 58:
Figure 58 displays the sixth most-recent alarm (2 2 6). This UPS sounded
alarm "A" (Low Battery). If the alarm is still active, an asterisk (*)
displays beside the letter alarm code. The alarm occurred on "02/05"
(February 5) at "17:51" (5:51 p.m.), and the alarm was active for "04:35"
(4 hours and 35 minutes).
Some alarms indicate the specific power or battery module slot number.
"Slot: nn" appears in the upper right hand corner, as shown in Figure 59,
indicating the slot number where the fault occurred.
+
Eaton 9170 UPS (3–18 kVA) User's Guide
and then press the B
2 2 6
A 02/05 17:51 04:35
Low Battery
Slot Top
Figure 58. Alarm Log Entry
2 2 6 Slot:
M 02/05 17:51 00:01
Open Cell
Slot Top
Figure 59. Alarm Entry for Specific Slot Number
S 164201393 Rev E www.eaton.com/powerquality
B button to move down to
button to move down to
#0
ESC
7
ESC
OPERATION
Y and B
85