Caster Cart Installation (Three- And Six-Slot Cabinets) - Eaton Powerware 9170+ UPS 3–18 kVA User Manual

INSTALLATION SETUP

Caster Cart Installation (Three- and Six-Slot Cabinets)

12
+
Eaton 9170 UPS (3–18 kVA) User's Guide
5. If installing the 9- or 12-slot cabinet in a rack, follow the installation
instructions with the 9- and 12-slot rack-mount kit.
6. If you are installing an external battery cabinet, continue to "Battery
Cabinet Installation" on page 61.
If you do not have an external battery cabinet, continue to "UPS
Startup" on page 67 for plug-receptacle units. For hardwired units,
continue to "UPS with Bypass Electrical Installation" on page 19 or
"UPS Electrical Installation" on page 39.
An optional caster cart (ASY-0527) is available for 3- and 6-slot cabinets
for increased mobility of the UPS (see Figure 7).
NOTE The UPS cabinet is heavy (see page 105). This procedure requires two people to lift
and position the cabinet onto the caster cart. Lift the cabinet using four lifting straps shipped
with the cabinet; do not attempt to lift the cabinet by the module shelves or other convenient
edges or covers.
Caster Cart
Figure 7. Three-Slot Cabinet Being Lowered onto Caster Cart
S 164201393 Rev E www.eaton.com/powerquality