2 Focus.
Pressthe shutter button halfway to focus.
_ (k)nt nuou'_Shoo fnq (Bu_ t Mo_te)
3 Shoot.
Pictures will be taken while the shutter button
is pressed. Shooting
ends when the
shutter button
is released, memory is full, or the selected number of shots has been
taken.
_-- Netes
• Focusand exposure are determined by the first frame in each series. Tile flash turns off automatically; tile previ-
ously-selected flash mode is restored when continuous shooting is turned off]
• Frame rate varieswith shutter speed.
• If the selfitimer is used when rr_ and _ are selected, only one picture will be taken when the shutter button is
pressed.
• At a setting of H%,white lines may appear in bright areas of the image; these carl be avoided by choosing
mode.
• The number of pictures that carl be recorded depends on tile memory available. AEbracketing is only available
if there is sufficient memory for three pictures. Additional time may be required to record pictures when shoot-
ing ends.
42