12
Turning the Camera On and Off
Shooting
Mode
Slide the ON/OFF switch in the direction
shown
below. The lens will extend automatically.
Slide the ON/OFF switch to turn the camera off.
%.Tip:Switching t oPlayback M ode
Pressthe [] button to start playback. Pressthe shutter
button halfway to return to shooting mode.
[M Cautions
• Be sure that the lens cap is removed before turning
tile camera on.
• Forcibly preventing tile lens from extending could
causedamage or product malfunction.
• Pictures carl be affected by fingerprints and other
marks on tile lens. Keep tile lensclean.
• Tile ON/OFF button does not completely disconnect
tile camera from its power supply.
Playback
Mode
To turn the camera on and begin playback, press
the []
button for about a second.
Pressthe []
button again or slide the ON/OFF
switch to turn the camera off.
%. Tip: Switchingto ShootingMode
To exit to shooting
mode, press the shutter
button
halfway.
Press the []
button
to return to playback.
%.Tip:Auto PowerOff
The camera will turn off automatically if no operations are performed for tile length of time selected in the
I_1 AUTO POWEROFF menu (seepage 98). To turn the camera on, use the ON/OFFswitch or pressthe [] but-
ton for about a second.