Display Setting - Magnavox MWR10D6 Owner's Manual

If "Other" is selected, press 4-digit code using the Number buttons.
Language - Subtitle
Code Input
- - - -
5
Press [SETUP] to exit.
Press [STOP C] if you are playing a disc.
1
Press [SETUP].
2
Using [K / L], select "Display". Press [OK].
Display menu will appear.
3
Using [K / L], select a desired item. Press [OK].
OSD Language (Default : English)
Set the language for the On Screen display.
Display
OSD Language English
Angle Icon ON
Screen Saver 10 minutes
Angle Icon (Default : ON)
Set to "ON" to show the Angle Icon during the playback.
Display
OSD Language English
Angle Icon ON
Screen Saver 10 minutes
Changing the Setup menu
Language setting (cont'd)
• When you finish entering
the code, press [OK].
Refer to the language
code table on page 74.

Display setting

OSD Language
English
Français
Español
Angle Icon
ON
OFF
Note
• Only the languages supported
by the disc can be selected.
• Audio Language setting may
not be available to some
discs.
• You can change or switch off
the subtitles on a DVD disc
also from the disc menu if it is
available.
• Press [CLEAR] or [s] to erase
numbers entered incorrectly.
2
3
• Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
• Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
Instructions continue on the next page.
5
1
EN 65