Magnavox MWR10D6 Owner's Manual page 32

Checking, canceling, or correcting the timer programming
information
1
Press [STANDBY-ON
TIMER REC indicator will be off.
2
Press [TIMER PROG.].
Timer Programming list will appear.
Timer Programming
Date Start End CH
1. JAN/01 12:57AM 1:57AM CH 8
2. ---
3. ---
3
4. ---
5. ---
Check the information on the
6. ---
list you will need. 7. ---
8. ---
To stop the Timer Recording in process
Press [STOP C] on the front panel of the unit.
[STOP C] on the remote control is not effective.
If the timer program did not complete correctly, the error number
appears in the Timer Programming list.
Timer Programming
Date Start End CH
*
JAN/01 12:57AM 1:57AM CH 8
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
Press [CLEAR] to erase the
selected program.
• A program with the error number is grayed and asterisked in the Timer Programming list.
• Once the Timer Programming list with error line(s) is displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be cleared.
30 EN
Recording
Timer Recording (cont'd)
4
]. To clear the timer programming:
Using [K / L], select the
program. Press [CLEAR].
To correct the timer program-
ming:
Using [K / L], select your desired
program. Press [OK].
Next, correct the timer
Mode
HQ
programming by using [K / L / {
/ B]. Finally, press [OK] again.
5
Press [TIMER PROG.] to exit.
6
Press [STANDBY-ON
return to the timer standby
mode.
Each error number means:
E1-22 Recording error other than
Mode
E37-39 below
E22
E23-24 Unrecordable disc
E25-26 Copy prohibited program
E29 Disc protected
E30 Disc full
E34 No space for Control
information
E35 PCA full
E36 Already finalized Video
format disc
E40 Some portion has not
been recorded because
of program overlapping.
Recording did not start at
the start time.
• E27,E28,E31,E32 and E33 are not displayed.
1
6
4
] to
Note
• Press [TIMER PROG.] to
check the timer programming
in process.
When the Timer Recording is
proceeding, that program will
be highlighted with red. In this
case, you cannot select any
other program.
E41 Power failed
E42 No disc when recording
E43 Already 49 titles recorded
E44 Already 254 chapters
recorded
E45 Copy prohibited program
E46 It is impossible to record
additionally on a disc
recorded by other units
when setting Replace Disc
Menu to OFF.
2
5