Dell Dimension 9150 Service Manual page 39

Removing and Installing Parts: Dell Dimension 9150 Service Manual
12. Ensure that:
The tops of all cards and filler brackets are flush with the alignment bar.
The notch in the top of the card or filler bracket fits around the alignment guide.
13. Close the card retention door by snapping it into place to secure the card(s).
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer
cover from closing properly or cause damage to the equipment.
14. If you installed a card, connect any cables that should be attached to the card.
See the documentation for the card for information about the card cable connections.
file:///T|/htdocs/systems/dim9150/en/sm/parts.htm[10/31/2012 7:59:36 AM]