Removing The I/O Panel - Dell OptiPlex 380 Mini-Tower Service Manual

Back to Contents Page
I/O Panel
Dell™ OptiPlex™ 380 Service Manual—Mini-Tower
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the I/O Panel

1. Follow the procedures in Before Working Inside Your Computer.
2. Disconnect the I/O panel data cable from the system board.
3. Remove the I/O data cable from the cable routing clip.