Table of Contents
Advertisement
Next steps
1. Install the
heat
sink.
2. Install the
solid-state
3. Install the
wireless
card.
4. Install the
memory
modules.
5. Install the
system-board
6. Install the stand.
7. Install the
bottom
cover.
8. Install the
back
cover.
9. Follow the procedure in
NOTE:
Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup
program after you replace the system board.
NOTE:
Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program.
You must make the appropriate changes again after you replace the system board.
Base panel
Removing the base panel
Prerequisites
1. Follow the procedure in
2. Remove the
back
cover.
3. Remove the
bottom
cover.
4. Remove the stand.
5. Remove the
hard
drive.
6. Remove the
system-board
7. Remove the
memory
modules.
8. Remove the fan.
9. Remove the
heat
sink.
10. Remove the antennas.
11. Remove the
wireless
card.
12. Remove the speakers.
13. Remove the
solid-state
14. Remove the
power-button
15. Remove the camera.
16. Remove the microphones.
17. Remove the
system
board.
18. Remove the
display
panel.
About this task
The following image indicates the location of the base panel and provides a visual representation of the removal procedure.
drive.
shield.
After working inside your
Before working inside your
shield.
drive.
board.
computer.
computer.
Removing and installing components
49
Advertisement
Table of Contents
