Removing The Fan; Replacing The Fan - Dell Latitude D410 Service Manual

Back to Contents Page
Fan
Dell™ Latitude™ D410 Service Manual
Removing the Fan
Replacing the Fan
Removing the Fan
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in "Preparing to Work Inside the
2. Remove the center control cover.
3. Remove the keyboard.
4. Remove the internal card with Bluetooth® wireless
5. Remove the display assembly.
6. Remove the palm rest.
7. Remove the fan cable connector from the system board.
8. Remove the three M2.5 x 5-mm screws from the fan, and lift the fan away from the system board.
1 M2.5 x 5-mm screws (3)
2 fan
3 fan cable connector
4 fan cable connector on the system board
Replacing the Fan
1. Reconnect the fan cable connector to the system board.
2. Replace the three M2.5 x 5-mm screws from the fan, and slide the fan back on the system board.
Back to Contents Page
Computer."
technology.