Back to Contents Page
Palm Rest
Dell™ Latitude™ D410 Service Manual
Removing the Palm Rest
Replacing the Palm Rest
Removing the Palm Rest
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the
center control
cover.
3. Remove the keyboard.
4. Remove the
internal card with Bluetooth® wireless
5. Remove the
display
assembly.
6. Turn the computer over and remove the 12 M2.5 x 5-mm screws from the computer base.
1
M2.5 x 5-mm screws (12)
7. Turn the computer top side up and remove the five M2.5 x 5-mm screws and the M2 x 3-mm screw from the palm rest.
Computer."
technology.