Removing The I/O Board; Replacing The I/O Board - Dell OptiPlex 160 Service Manual

Back to Contents Page
I/O Board
Dell™ OptiPlex™ FX160/160 Service Manual
Removing the I/O Board
Replacing the I/O Board
Removing the I/O Board
1. Perform the procedure in Before Working on Your
2. Remove the two screws that secure the I/O board to the chassis.
1 screws (2)
3. Carefully lift the I/O board out of the computer, ensuring the three cables are clear of the cable guide.
4. Disconnect the three cables (Audio, USB and Front Panel) from the I/O board.
Replacing the I/O Board
1. Connect the three I/O board cables (Audio, USB, and Front Panel) to the I/O board.
1 front panel connector
3 USB connector
2. Place the cables under the cable guide metal tab, and align the holes in the I/O board with the screw holes on the chassis, ensuring that the middle of
the I/O board rests in the metal clip.
3. Secure the I/O board to the chassis with two screws.
Computer.
2 cable guide
2 audio connector
4 I/O board