Removing The Power Supply; Replacing The Power Supply - Dell OptiPlex 160 Service Manual
Hide thumbs
Also See for OptiPlex 160:
- Technical manualbook (22 pages) ,
- Setup and features information (8 pages) ,
- Manual (20 pages)
Table of Contents
Advertisement
Back to Contents Page
Power Supply
Dell™ OptiPlex™ FX160/160 Service Manual
Removing the Power Supply
Replacing the Power Supply
Removing the Power Supply
1. Perform the procedure in
Before Working on Your
WARNING:
The power supply can become very hot during normal operation. Allow the power supply to cool before touching it.
2. Disconnect the 12V power supply connector from the system board (see
1
power supply 12V connector
3
power supply
3. Remove the back panel screw.
4. Remove the chassis screw.
5. Slide the power supply slightly toward the front of the computer and lift up out of the chassis.
Replacing the Power Supply
1. Place the power supply in the chassis and slide it back against the back panel.
1
back panel screw
Computer.
2
back panel screw
4
chassis screw
2
chassis screw
System Board
Connectors).
Hide quick links:
Advertisement
Table of Contents
