Technical Specifications - Dell Dimension 4600C Service Manual

Hide thumbs Also See for Dimension 4600C:
Table of Contents

Advertisement

Back to Contents Page
 

Technical Specifications

Dell™ Dimension™ 4600C Service Manual
  Microprocessor
  System Information
  Expansion Bus
  Memory
  Drives
  Ports and Connectors
  Video
  Audio
  Network
  Controls and Lights
  Power
  Physical
  Environmental
 
Microprocessor
 Microprocessor
 Intel® Pentium® 4 with HT Technology that runs at 2.40, 2.60, 2.80, 3.00, or 3.20 GHz internally and 800 MHz externally or 2.26, 2.40,
type
2.53, 2.66, 2.80, or 3.06 GHz internally and 533 MHz externally
 NOTE:
Not all Pentium 4 processors support Hyper-Threading technology.
 Intel Celeron® D processor 325, 330, or 335
 NOTE:
Dell™ Dimension™ 4600C computers with Intel Celeron processors are available only in Japan. 
 L1 cache
 8 KB first-level
 L2 cache
 256-KB, 512-KB, or 1-MB pipelined-burst, eight-way set associative, write-back SRAM
 
System Information
 System chip set
 Intel 865G
 DMA channels
 four
 Interrupt levels
 24 APIC mode
 System BIOS chip  4 Mb (512 KB)
 System clock
 533- or 800-MHz quad-data rate
 
Expansion Bus
 Bus types
 Bus speed
 AGP
 AGP connector
 AGP connector size
 AGP connector data width (maximum)  32 bits
 AGP video bus protocols
 PCI connectors
 PCI connector size
 PCI connector data width
(maximum)
 
Memory
 Architecture
 DDR SDRAM
 Memory connectors  two
 Memory capacities
 128-, 256-, 512-MB, and 1-GB non-ECC DDR SDRAM
 Minimum memory
 256 MB
 Maximum memory
 2 GB
 PCI and AGP
 PCI: 33 MHz
 AGP 1X, 4X, 8X
 one low profile
 172 pins
 4x mode at 1.5 V
 one low profile
 120 pins
 32 bits

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents