Technical Specifications - Dell Dimension 2400 Series Manual

Back to Contents Page

Technical Specifications

Dell™ Dimension™ 2400 Series
Microprocessor
Microprocessor type
L1 cache
L2 cache
System Information
System chip set
DMA channels
Interrupt levels
System BIOS chip
System clock
Expansion Bus
Bus types
Bus speed
PCI connectors
PCI connector size
PCI connector data width
(maximum)
Memory
Architecture
Memory connectors
Memory capacities
Minimum memory
Maximum memory
Memory type
Drives
Externally accessible
Internally accessible
Ports and Connectors
Externally accessible:
Serial
Parallel
Video
Keyboard
Intel® Pentium® 4 that runs at 2.2 or 2.4 GHz
internally and 400 MHz externally, or 2.266, 2.4,
2.53, 2.66, 2.8, or 3.06 GHz internally and 533 MHz
externally.
Intel Celeron® that runs at 2.0, 2.2, 2.3, 2.4, 2.5,
2.6, or 2.7 GHz internally and 400 MHz externally.
8 KB first-level (Pentium 4 and Celeron).
256- or 512-KB (displayed in the system setup
program) pipelined-burst, eight-way set
associative, write-back SRAM (Pentium 4);
128-KB SRAM that resides in the processor's core.
The L2 cache runs at the processor's internal clock
speed (Celeron).
Intel 845GV
eight
24 APIC mode
4 MB (512 KB)
400- or 533-MHz data rate
PCI
PCI: 33 MHz
three
120 pins
32 bits
DDR SDRAM
two
128-, 256-, or 512-MB
128 MB shared DDR SDRAM
NOTE: Between 32 and 64 MB of system memory
may be allocated to support graphics, depending on
system memory size and other factors.
2 GB
PC2100 (266-MHz) or PC2700 (333-MHz) DDR
SDRAM (non-ECC)
two 5.25-inch bays
one 3.5-inch bay
one bay for 1-inch–high IDE hard drive
9-pin connector; 16550C-compatible
25-hole connector (bidirectional)
15-hole connector
6-pin mini-DIN connector