Replacing The Processor - Gateway 450RGH Service Manual

Replacing the processor

Tools you need to complete this task:
Screws removed during this task:
4 chrome 2.5 × 2.5 mm
(keyboard)
To replace the processor:
1
Disconnect the AC adapter, modem and network cables, then prepare the notebook
by following the instructions in
2
Turn the notebook over so the bottom is facing up.
3
Remove the main battery by following the instructions in
battery" on page
4
If the modular bay contains the secondary battery, remove the secondary battery
by following the instructions in
page 10.
5
Turn the notebook over so the top is facing up.
6
Remove the keyboard cover by following the instructions in
cover" on page
7
Remove the keyboard by following the instructions in
page 28.
8
Remove the cooling assembly by following the instructions in
assembly" on page
Flat-blade driver
Phillips #0 screwdriver
4 chrome 2.5 × 4 mm
(cooling assembly)
"Preparing the notebook" on page
8.
"Replacing the modular bay component" on
25.
41.
www.gateway.com
Replacing the processor
- OR - Scribe or non-marring tool
"Removing the main
"Replacing the keyboard
"Replacing the keyboard" on
"Replacing the cooling
7.
47