Replacing The Hard Drive Kit - Gateway 450RGH Service Manual

Replacing the hard drive kit

Tools you need to complete this task:
Screws removed during this task:
1 chrome 2.5 × 4 mm
(hard drive kit)
To replace the hard drive kit:
1
Disconnect the AC adapter, modem and network cables, then prepare the notebook
by following the instructions in
2
Turn the notebook over so the bottom is facing up.
3
Remove the main battery by following the instructions in
battery" on page
Phillips #0 screwdriver
Hard Drive
"Preparing the notebook" on page
8.
www.gateway.com
Replacing the hard drive kit
7.
"Removing the main
19