Table of Contents
Advertisement
System Board: Dell Latitude V710/V740 Service Manual
NOTICE:
Route cables so that they will not be crimped or pinched when the complete assembly is put
back together.
4. Replace the
palm
5. Replace the
video board
6. Replace the
display assembly
7. Replace the
floppy
8. If applicable, replace the PC Card in the PC Card slot.
9. Replace the battery.
10. Connect the AC adapter to your computer and to an electrical outlet.
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain
inside the computer. Failure to do so may result in damage to the computer.
11. Turn on the computer.
12. Insert the floppy disk or CD that accompanied the replacement system board into the appropriate drive,
and turn on the computer. Follow the instructions on the screen.
NOTE:
After replacing the system board, enter the computer service tag sequence into the BIOS of the
replacement system board.
Back to Contents Page
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...740/v710%20v740%20SERVICE_MANUAL/sysboard.htm (7 of 7)6/21/2004 2:57:10 AM
rest.
and the
EMI shield
and the keyboard.
drive,
optical
drive, modem,
that you removed from the old system board.
memory
module, and
hard
drive.
Advertisement
Table of Contents
